Material Classification of Pipe Fittings

1. Pipe fittings are divided by material:

Carbon steel: ASTM/ASME A234 WPB, WPC

Alloy: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP911, 15Mo3 15CrMoV, 35CrMoV

Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N

                     ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti

                     ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H

Low temperature steel: ASTM/ASME A402 WPL3-WPL 6

High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70 cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon leaching, PVC, PPR, RFPP (reinforced polypropylene), etc. .

2. Divided by the production method can be divided into push, press, forge, casting and so on.

3. According to the manufacturing standards, it can be divided into national standard, electric standard, ship standard, chemical standard, water standard, American standard, German standard, Japanese standard and Russian standard.

4. According to its radius of curvature: can be divided into long radius elbow and short radius elbow. The long radius elbow refers to the outer diameter of the tube whose radius of curvature is equal to 1.5 times, ie R=1.5D; short radius elbow; It means that its radius of curvature is equal to the outer diameter of the tube, ie R = 1.0D. (D is the elbow diameter and R is the radius of curvature).

5. If divided according to pressure level: there are about seventeen kinds, which are the same as the American pipe standards: Sch5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS; Sch80, SCH100, Sch120, Sch140, Sch160, XXS; the most commonly used are STD and XS.