Common methods of 3PE anti-corrosion steel pipe anti-corrosion

Common methods for 3PE anti-corrosion steel pipe anti-corrosion:

1. Pipeline anticorrosion generally adopts two main methods of external coating and cathodic protection.

2. Although most of the surface of the pipeline is covered by the coating, a slight leak will cause an incredible corrosion rate, and even perforation or cracking. Therefore, in pipeline anticorrosion, the coating system and cathodic protection are generally used together to achieve a coverage rate of 99.99%, so as to avoid unimaginable results in the future.

3. The cathodic protection used for pipeline anticorrosion is divided into dedicated cathodic protection and impressed current cathodic protection.

4.3 The purpose of the anti-corrosion coating of PE anti-corrosion steel pipes is to form a continuous covering layer of insulating material, which directly insulates the metal and the electrolyte in direct contact with it so that the correct electrolytic reaction cannot occur.

5. The discontinuous points in the coating laying process are called leaking points. The main reasons for the occurrence are during coating, transportation or installation, and it may also be caused by coating aging, soil stress, or pipeline movement in the soil. Timely discovery of damage caused by third parties.